Wavlink AC1200 Setup

Setting up a Wavlink AC1200 Setup is relatively straightforward. Here’s a step-by-step guide:

Before you Begin:

  1. Make sure you have a Wi-Fi network already set up and running.
  2. Identify the optimal location for your extender. It should be placed midway between your router and the area where you need better Wi-Fi coverage.
  3. Keep your Wi-Fi network name (SSID) and password handy. You’ll need these during the setup process.

Step 1: Plug in the Extender:

  1. Plug your Wavlink AC1200 extender into a power outlet within the range of your existing Wi-Fi network.
  2. Wait for the Power LED on the extender to light up. This indicates that the extender is powered on and ready.

Step 2: Connect to the Extender:

  1. On your computer or mobile device, go to the Wi-Fi settings.
  2. Look for a network named something like “Wavlink” or “Wavlink-Extender” in the list of available networks.
  3. Connect to this network. The default Wi-Fi password may be printed on the back of your extender or included in the user manual. If prompted, enter the password to connect.

Step 3: Configure the Extender:

  1. Once connected to the extender’s network, open a web browser on your device.
  2. In the address bar, type in the IP address of the extender. This is typically “”, but you can verify in the user manual or on the sticker on the extender itself.
  3. Press Enter. This should bring you to the extender’s configuration page.
  4. Follow the on-screen instructions to set up the extender. This usually involves selecting your existing Wi-Fi network from a list of available networks and entering the Wi-Fi password.
  5. Once you’ve entered the necessary information, save your settings and wait for the extender to reboot.

Step 4: Connect Devices to the Extender:

  1. After the extender has rebooted, go back to your device’s Wi-Fi settings.
  2. Look for your original Wi-Fi network in the list of available networks and connect to it as you normally would.
  3. You can now enjoy extended Wi-Fi coverage in the area where you previously had poor signal strength.

Step 5: Optional Settings:

  1. Once your extender is set up, you may want to explore additional settings, such as changing the network name (SSID) or password, updating firmware, or adjusting advanced Wi-Fi settings. These options are typically accessible through the extender’s web interface.

Final Tips:

  • Make sure to place the extender in a central location for the best coverage.
  • Avoid placing the extender too close to electronic devices or large metal objects, as these can interfere with the Wi-Fi signal.
  • If you encounter any issues during setup, consult the user manual or contact Wavlink’s customer support for assistance.

Following these steps should help you successfully set up your Wavlink AC1200 WiFi range extender Setup and improve your Wi-Fi coverage.